 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| New Product Release Surface Mount Ceramic Chip Capacitors X5R Dielectric KEMET is pleased to continue the expansion of high capacitance ratings in our X5R ceramic chip capacitors to include the following values in our base metal electrode devices. X5R/0603 - 2.7 F (275) - 4.7 (475) @ 6.3 Volts Outline Drawing Table 1 Dimensions - Millimeters (Inches) Metric EIA Size Size Code Code L - Length 1608 0603 1.6 (.04) 0.15 (.006) Max. W - Width T - Thickness B - Bandwidth Separation 0.8 (.032) 0.15 (.006) See Table 2 0.35 (.014) 0.15 (.006) 0.7 (.028) Table 2 - X5R - Capacitance Value Extensions Capacitance Values (F) 2.7 3.3 4.7 KEMET Part Number C0603C275(1)9PAC C0603C335(1)9PAC C0603C475(1)9PAC Capacitance Tolerance K,M K,M K,M Thickness mm 0.8 .15 0.8 .15 0.8 .15 Qty 7" Reel 4,000 4,000 4,000 Qty 13" Reel 10,000 10,000 10,000 (1) To complete KEMET part number, insert the alpha code for the tolerance desired. K = 10%; M = 20% Note: 0402 and 0603 components are reeled on paper tape. F-9015 11/04 Electrical Parameters As detailed in the KEMET Surface Mount Catalog F3102 for X5R, with following specific requirements based on room temperature (25C) parameters: * Operating Range: -55C to +85C, with no-bias capacitance shift limited to 15% over that range * Insulation Resistance (IR) measured after 2 minutes at rated voltage @ 25C: Limit is 500 megohm microfarads or 100 gigohms, whichever is less. * Capacitance and Dissipation Factor (DF) measured at the following conditions. DF Limit is 10%. 1 kHz and 1 Vrms if capacitance 10 F 120 Hz and 0.5 Vrms if capacitance > 10 F Soldering Process The 0603 components are suitable for reflow or wave soldering. All parts incorporate the standard KEMET barrier layer of pure nickel, with an overplate of pure tin to provide excellent solderability as well as resistance to leaching. Marking These chips are normally supplied unmarked. If required, they can be laser marked as an extra cost option. More detail on the marking format is included in our Surface Mount Catalog F3102. In general, the information in the KEMET Surface Mount catalog F3102 applies to these capacitors. The information in this bulletin supplements that in the catalog. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * (864) 963-6300 * www.kemet.com |
Price & Availability of C0603C2759PAC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |